Find Hammer Screw Jaw Crusher, Screw Jaw Crusher, Metso Jaw Crusher Screw on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Screw & Bolt > Screw for Jaw Crusher

Screw for Jaw Crusher

  • Screw for Jaw Crusher
  • Screw for Jaw Crusher
  • Screw for Jaw Crusher
  • Screw for Jaw Crusher

Screw for Jaw Crusher

    Unit Price: 200 USD
    Min. Order: 1 Piece/Pieces
    Packaging: export package
    Productivity: 1000 pieces per monthly
    Brand: Tianyi Mining
    Transportation: Ocean,Air,Express
    Place of Origin: China
    Supply Ability: 1000 pieces Per Monthly
    Certificate: ISO9001
    HS Code: 84749000
    Port: Dalian Seaport,Tianjin Seaport,Beijing Airport

Basic Info

Model No.: C80-160

Product Description

Screw for Jaw Crusher


Jaw Crushers are used for the rapid, powerful crushing and pre-crushing of mediumhard, hard, brittle and tough materials. The variety of materials offered, their efficiency and safety make them ideal for sample preparation in laboratories and industrial plants.


Screw Jaw Crusher


Shenyang Tianyi Mining Machinery Co., Ltd. provides thousands of Spare Parts for all the above models, such as: uniform feeding device, safety guard, fixed cone feeding hopper, locking ring, adjusting ring, fixed cone, main frame, spherical tile, Eccentric sleeve bushing, drive shaft, drive shaft sleeve, big gear, pinion gear, main shaft, eccentric sleeve, eccentric sleeve thrust bearing, iron release assembly, counterweight guard plate, moving cone lower bushing, anti-rotation device , Moving cone, moving cone upper bushing, moving cone liner, fixed cone plate, fixed cone liner, fasteners, distribution plate, locking screw, moving cone sphere, locking cylinder, cutting ring, feeding plate , Adjusting cap, large gear ring, fixed cone liner Bolts, adapter ring, main frame seat cushion, release cylinder, moving cone upper copper sleeve, T-seal, moving cone lower copper sleeve, main frame guard plate, rib guard plate, U-shaped seal, lower thrust bearing, distribution plate bolt, locking bolt, dust cover, main frame pin, moving cone ball pin, spherical tile holder, eccentric steel sleeve, eccentric copper sleeve, counterweight, upper thrust bearing, horizontal Axle box, horizontal shaft frame guard plate, horizontal shaft box cover, fuel tank, horizontal shaft copper sleeve, hydraulic motor assembly; main frame assembly, fixed cone assembly, spherical bearing assembly, eccentric sleeve, counterweight, gear assembly Assembly, adjusting ring assembly, moving cone assembly, horizontal shaft assembly, distribution tray assembly.



Measures to prolong the service life of jaw crusher
1. Try to use good quality hammers
In view of the quality problem of the blower, Songyuan Industrial recommends to use the blower from the original crusher manufacturer, which basically meets the quality requirements.
2. Re-make the bolt mold
The elliptical head of the bolt and the contact surface of the hammer screw hole can be in good contact, and at the same time, the thickness of the bolt thread is controlled within the size tolerance, and the end of the thread is processed into an unloading groove to prevent stress concentration and fracture.
3. Strengthen the use and maintenance management
First, when installing the hammer, the sand and burrs from the bolt holes and notches of the hammer must be removed to make the connection smooth; secondly, when tightening the hammer bolts, hammer the elliptical head while tightening; After running for about half an hour, check the bolt tightening in time, and then spot weld the nut and thread to prevent loosening.
4. The materials must meet the equipment requirements when feeding
Before feeding, the operator must read the crushing range of the equipment carefully. Because different crushers have different hardness of the materials, the materials should be treated in advance to reduce the viscosity and water content of the materials. Only in this way can the crusher achieve its maximum performance.



Precautions for jaw crusher operation
(1) Each time you use the breaker, first check whether the high-pressure or low-pressure oil pipe of the breaker is loose; at the same time, for the sake of caution, you should always check whether there is oil leakage in other places, so as to prevent the a oil pipe from falling off due to vibration. Fault.
(2) During the operation of the breaker, the drill rod should always be kept perpendicular to the surface of the object to be broken. And make the drill rod tightly press the broken object, and stop the work of the breaker immediately after breaking to prevent runaway. Continuous aimless impact will cause damage to the precursor of the breaker and loosening of the main body bolts, which can damage the host itself in severe cases.
(3) When performing crushing action, do not use it by shaking the drill rod, otherwise the main bolt and drill rod may be broken; do not drop the breaker quickly or hit hard rock hard, which may cause excessive impact And damage the breaker or the host.
(4) Do not carry out crushing operations in water or muddy ground. Except for drill rods, other parts of the breaker body should not be immersed in water or mud, otherwise the pistons and other parts with similar functions will accumulate mud stains. This results in premature wear of the breaker.
(5) When crushing a particularly hard object, start from the edge first, and do not continuously beat at the same point for more than 1 min to prevent the drill rod from burning or the hydraulic oil from overheating.
(6) Do not use the guard plate of the breaker as a tool to push heavy objects. Since all backhoe loaders are mainly small machines, they are light in weight. The boom broke, and even the main engine overturned.
(7) Work when the hydraulic cylinder is fully extended or fully retracted, otherwise the shock and vibration will be transmitted to the hydraulic cylinder and thus to the main engine.

ShenYang TianYi Mining Machinery Co., Ltd

  • 1
  • 2
  • 3
  • 4
  • 5
 

Shenyang Tianyi Mining Machinery Co., Ltd. was established in 2020. We are a combination of engineers and sales teams with more than 10 years of work experience. They have all worked in world-renowned mining companies.

Quality and service are the company's purpose. We will provide high-quality products and completed supporting programs to serve mining companies all over the world.

We provide high-quality Spare Parts for cone crushers and jaw crushers to replace the original spare parts.

Our customers come from: Britain(UK), France, Finland, Sweden, Russia, the United States(USA), Chile, Peru and Australia.

Company Info

  • Company Name: ShenYang TianYi Mining Machinery Co., Ltd
  • Representative: JASON CHOW
  • Product/Service: Crusher Spare Parts , Crusher Bushings , Crusher Frame , Jaw Crusher Parts , OEM Crusher Parts , Cone Crusher
  • Capital (Million US $): US$ ONE MILLION
  • Year Established: 2020
  • Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
  • Export Percentage: 91% - 100%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Contact Person: Mr. Jason
  • Tel: 86--13002428518
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters